11 Haziran 2012 Pazartesi

Sealing ROV1

IMG_20120611_135035IMG_20120611_132539IMG_20120611_155903IMG_20120611_155754IMG_20120611_155611IMG_20120611_155600
IMG_20120611_142825IMG_20120611_142702IMG_20120611_142150IMG_20120611_141004IMG_20120611_140853IMG_20120611_135736
IMG_20120611_135646IMG_20120611_135642IMG_20120611_135109

Sealing ROV1, a set on Flickr.
After initial tests of the ROV1 it became clear that it was really leaking.
I has used cheap foam gaskets for attaching the windows and no seal at all around the bushings for the motor and surface cables.
Christian of Illutron gave me some soft 3mm. vinyl sheet. This stuff seem ideal except it's really nasty to laser cut.
Adding an extra O-ring seal ensures that all packing surfaces are facory finished.
After testing with a vacuum pump I am now much more confident that this little ROV will stay dry inside.

Hiç yorum yok:

Yorum Gönder